Required equipment

No amount of equipment can compensate for lack of knowledge, skill, experience and judgment. Nevertheless, without the right equipment, you will not only not be as safe, your ability to learn will be compromised as well.

Here is a list of the items you will need to take part in any one of our Cave or Technical Diver courses. Certain specialty programs may require additional equipment (such as an expedition-grade DPV for the DPV course). You will not, however, need stage bottles for the entry-level Cave Diver course, nor will you need a deco bottle if only taking the first two days of Cave Diver training.

Some of these items you may already own. Others you may need to purchase. If you will be flying to Florida to take your course, you should plan on renting heavier items, such as tanks, here. Overall, it is best to own as much of your equipment as possible.

Be sure to discuss with Reggie the equipment you already own and that which you plan to purchase. Cave equipment is not exactly cheap. Save time and money by getting the right equipment the first time.


MaskLike all masks, yours should combine a streamlined design, low volume and wide field of vision. Most cave and tech divers prefer masks with black silicone skirts, as these admit less overall light and cause your pupils to dilate. It is a common practice among cave divers to carry a compact backup mask in a separate pocket.


FinsNo split fins; no hinged fins — period. You need powerful, flat-bladed paddle fins that offer the least potential for entanglement and which facilitate frog kicking and other specialized propulsion techniques. If your fins do not already have spring heel straps, get some.

Exposure Protection

Suit“Room temperature” (21° C/72° F) water sucks heat from your body faster than 4° C/39° F air does. As a minimum, you need at least a 7 mm full-length wet suit and a hood. Most cave divers dive dry. No gloves — unless they have the fingertips cut off (to better feel the guideline). Thigh pockets are all but essential.


ComputerYou will need two independent means of monitoring depth and time. These can be:

  • Two dive computers.
  • A dive computer and a depth gauge/timer.
  • Two depth gauge/timers.

Both your dive computers must be mission-capable — that is, capable of tracking exposure to multiple gas mixtures and calculating decompression stops. If you will not be using two computers, you will also need a set of dive tables with decompression stop times.

BC Air Cell/Harness and Primary Cylinders

DoublesStudents in Cave Diver courses can choose to dive backmount or sidemount. Students who will be using sidemount must either be able to document prior sidemount experience, or have taken the Sidemount Orientation (i.e., Recreational Sidemount Diver) course. This can be done before or in conjunction with the Cave Diver course.

  • Sidemounting students will need an appropriate sidemount harness and air cell and at least two 13-liter/85-cubic-foot or larger cylinders with sidemount attachment hardware.
  • Backmounting students will need manifolded doubles with a dual-orifice, isolation manifold. Other than tank bands, the cylinders should be completely “clean̵ — i.e., no additional hose clamps, D-rings or bungees.

Backmounting students will also need either a backplate and harness, or a harness designed specifically for cave and tech diving in doubles (most backmounting cave divers prefer a backplate and harness). Air cells must be capable of providing adequate lift — although redundant bladders are not necessary.


RegulatorFor your primary cylinders you need two separate balanced-first-stage regulators (two first stages with one second stage each). First stage port configuration needs to facilitate proper hose routing for back- or sidemounting. At least one second stage must have a two-meter/seven-foot hose for gas sharing. Hose length for the remaining first stage, as well as high-pressure and inflator hose length will vary depending on body size and whether you are back- or sidemounting. Consult Reggie for specifics.

Stage and Deco Bottles

Deco bottleFor all but the first two days of the Cave Diver program and for any Tech Diver course beyond Tech Basics, you will need a deco bottle filled with EAN80 or a higher PO2 gas mix (filling with pure O2 is vastly more convenient). Student in Technical Cave courses will need at least one 11-liter/80-cubic-foot stage bottle. Deco regs can be unbalanced piston models but must be oxygen service rated. “Button” or stem SPGs are okay for deco regs. Stage regs need to offer the same level of performance as your primary regs and need a full-size SPG on a short hose.

Primary Light

Primary lightYou will want a 1,000+ lumen LED primary light. These are available from any of a number of manufacturers. Your primary light must incorporate a Goodman-style or similar hand mount. No pistol grips or lanyards, period.

Backup Lights

Backup lightYou will need two LED backup lights. Avoid cheap lights with plastic bodies (your life is worth more). Get backup lights specifically designed for cave and/technical diving.


Safety Reels/Spools

SpoolYou will need at least one reel or spool with 30 m/100 feet or more of line, plus an additional reel or spool. While spools provide a convenient way to manage short lengths of guideline, reels provide a better means of managing 10 m/30 ft or more of guideline, and are our recommendation.

Cutting Tools

Z-knifeConventional dive knives are effectively useless when it comes to dealing with entanglement. They are big, bulky, cause entanglement and don’t hold an edge. Some variation on a parachute line cutter (i.e., Z-knife) is better. You will want two line cutters (some divers carry trauma shears as their backup cutter).

Slate/Wet Notes

Wet NotesWrist slates are great for tech diving; not so good for cave diving. Wet notes provide a better alternative. Keep them in your thigh pocket, as they will not be seeing much use…unless you screw up.

Surface Marker Buoy (SMB)

SMBFor technical diver course you will also need an SMB. Your SMB needs to be the type you can inflate under water using exhaust from your regulator.



Understand this list provides the briefest overview of the equipment you will need. There are issues regarding configuration and mounting that are best covered in person with Reggie. Be prepared to invest in some additional (but generally minor) equipment items. such as snaps and clips, when you arrive for training.

Again, do not make any equipment purchases without discussing them with Reggie first.